Arc Max Unlimited 5×10 CNC Plasma Table
Arc Max Unlimited 5×10 CNC Plasma Table
The Arc Max Unlimited 5×10 CNC Plasma Table is the no-compromise solution for your shop, when simplified ease of use, production capability, and heavy plate processing are essential to your business’s success. With integrated FlashCut CNC – reliability, accuracy, and efficiency are at the foundation of the design of Arc Max Unlimited series tables.
The Arc Max Unlimited is built on a reinforced, welded and unitized frame of thick steel tubing, allowing for heavy-duty cutting applications up to 3 inches thick (MS Plate). The precision-designed gantry is engineered from low mass aircraft grade aluminum, providing exceptional rigidity and first-class acceleration and deceleration characteristics; most desirable in high-performance CNC plasma tables.
FlashCut CNC comes standard on all Arc Max Unlimited tables. Decades of experience, superior features and tens of thousands of satisfied customers world-wide make FlashCut’s fully integrated CAD/CAM/CNC plasma control system among the best in the world.
The Unlimited Series CNC Plasma Tables are designed to easily change between Hypertherm MAXPRO200, Powermax 45, 65, 85, 105 or 125 Power Supplies or OxyFuel Cutting Processes. Capable of cutting a dynamic range of material from thin-gauge sheet metal through 3-inch thick plate with ease.
Log In for Quote or to Purchase!
Learn More
About This Piranha Product
The Arc Max Unlimited CNC Plasma Table from Arclight Dynamics is available in 6×12, 5×10, and 4×8. The Arc Max Unlimited CNC Plasma Cutting Tables are pushing the limits of what an air plasma cutter is capable of.
The Flashcut CNC software interface is simple and easy to run allowing anyone to walk up to the machine a cut a part with minimal effort and training. In minutes you can set up the machine to design and cut parts, allowing the operator to complete other projects.
The Unlimited Series of CNC Plasma Tables are designed specifically to be integrated with a Hypertherm MAXPRO200 or an Oxy-Fuel Torch.
An Arclight Dynamics CNC plasma table will be, hands down, the best investment for your shop and cost less than a part time employee. In addition, your new CNC Plasma Table will come with a full team of Arclight support technicians (Arc Angels) to assist you every step of the way.
Each Arc Max Unlimited CNC Plasma Table comes will an industry leading limited lifetime warranty on the table frame, 1 year warranty on its controller and motion control system, and a 1 year warranty on the dedicated computer.
We proudly build our CNC Plasma Tables in the United States. We believe strongly in honest business transparency without hidden fees or recurring charges.
Compare Models
Learn more about the differences of the Arc Max Unlimited.
| Features | Arc Max Unlimited | Arc Max Elite |
| |
| Plate Capacity | 3 inch plate thickness | 2 inch plate thickness |
| MaxPro 200 Compatibility | YES | NO |
| Oxy-Fuel Compatibility | YES | YES |
| Slat Depth | 4.5 inches | 2.5 Inches |
| Controller | Flashcut CNC | Flashcut CNC |
| Integrated CAD/CAM/CNC | YES | YES |
| Automatic Nesting Software | YES | YES |
| Work-Piece Alignment | YES | YES |
| Rapids | 800 IPM | 800 IPM |
| Motors | Nema 34- 940 oz Stepper | Nema 34- 940 oz Stepper |
| Motor Cabling | XLR Quick Connectors | XLR Quick Connectors |
| Laser Alignment | Optional | Optional |
| Collision Detection | System Ready | System Ready |
| Hole Cutting | Smart 360® Hole Cutting Technology | SMART 360® HOLE CUTTING TECHNOLOGY |
| Serial Communication | YES | YES |
| Easy CAD/Image Import | YES | YES |
| CAD Error Fix Tool | YES | YES |
| CAD Feature Welding Tool | YES | YES |
| CAD-DXF Export | YES | YES |
| CAM 3D Cutting Simulation | YES | YES |
| CNC-THC Performance History Chart | YES | YES |
| CNC Automated Remanant Cut off | YES | YES |
| Ohmic & Mechanical Touch-Off | Both | Both |
| CNC Automatic Lead-in on Restart | YES | YES |
| | |
HYPERTHERM PLASMA SPECIFICATIONS
POWERMAX 45XP
POWERMAX 45XP
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED |
| 10 GA MS | 181 IPM |
| 1/4” MS | 72 IPM |
| 3/8” MS | 38 IPM |
| 1/2”MS | 24 IPM |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.95% pure |
| Recommended gas inlet flow and pressure | 400 scfh @ 85 psi (190 slpm @ 5.9 bar) |
Power Connections for the Powermax 45XP (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-240V SINGLE PHASE | 39 | 44 | 50A |
| 208V SINGLE PHASE | 37 | 43 | 50A |
| 480V THREE-PHASE | 9.4 | 17 | 20A |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 809240 Revision 1 |
POWERMAX 65 SmartSYNC
POWERMAX 65 SmartSYNC
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED |
| 10 GA MS | 224 IPM |
| 1/4” MS | 116 IPM |
| 3/8” MS | 62 IPM |
| 1/2” MS | 40 IPM |
| 5/8” MS | 26 IPM |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar) |
Power Connections for the Powermax 65 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-208V SINGLE-PHASE | 52 | 74 | 80 |
| 230-240V SINGLE-PHASE | 44 | 74 | 80 |
| 480V SINGLE PHASE | 22 | 38 | 40 |
| 200-208V THREE-PHASE | 32 | 45 | 50 |
| 230-240V THREE-PHASE | 27 | 45 | 50 |
| 400V THREE-PHASE | 15 | 27 | 30 |
| 480V THREE-PHASE | 13 | 23 | 25 |
| 600V THREE-PHASE | 13 | 23 | 25 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 806650 Revision 3 |
POWERMAX 85 SmartSYNC
POWERMAX 85 SmartSYNC
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED |
| 10 GA MS | 336 IPM |
| 1/4” MS | 164 IPM |
| 3/8” MS | 80 IPM |
| 1/2” MS | 48 IPM |
| 5/8” MS | 30 IPM |
| 3/4” MS | 24 IPM |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 400 scfh @ 85 psi (190 slpm @ 5.9 bar) |
Power Connections for the Powermax 85 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200-208V SINGLE-PHASE | 70 | 98 | 100 |
| 230-240V SINGLE PHASE | 60 | 98 | 100 |
| 480V SINGLE PHASES | 29 | 50 | 50 |
| 200-208V THREE-PHASE | 42 | 60 | 60 |
| 230-240V THREE-PHASE | 36 | 60 | 60 |
| 400V THREE PHASE | 21 | 38 | 40 |
| 480V THREE-PHASE | 18 | 31 | 30 |
| 600V THREE-PHASE | 17 | 30 | 30 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 806650 Revision 3 |
POWERMAX 105 SmartSYNC
POWERMAX 105 SmartSYNC
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED |
| 10 GA MS (85 amp process) | 336 IPM |
| 1/4” MS | 192 IPM |
| 3/8” MS | 116 IPM |
| 1/2” MS | 76 IPM |
| 5/8” MS | 52 IPM |
| 3/4” MS | 40 IPM |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 460 scfh @ 85 psi (220 slpm @ 5.9 bar) |
Power Connections for the Powermax 105 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 200V THREE-PHASE | 58 | 82 | 80 |
| 208V THREE-PHASE | 56 | 82 | 80 |
| 240V THREE-PHASE | 49 | 78 | 80 |
| 480V THREE-PHASE | 25 | 40 | 40 |
| 600V THREE-PHASE | 22 | 35 | 40 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 817390 Revision 2 |
POWERMAX 125
POWERMAX 125
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED |
| 10 GA MS (65 amp process) | 296 IPM |
| 1/4” MS | 225 IPM |
| 3/8” MS | 138 IPM |
| 1/2” MS | 93 IPM |
| 5/8” MS | 66 IPM |
| 3/4” MS | 48 IPM |
| GAS TYPE | AIR | NITROGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.2.2 | 99.995% pure |
| Recommended gas inlet flow and pressure | Cutting: 550 scfh @ 85 psi (260 slpm @ 5.9 bar) |
Power Connections for the Powermax 125 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | INPUT CURRENT AT ARC STRETCH (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 480V THREE-PHASE | 31 | 50 | 50 |
| 600V THREE-PHASE | 24 | 38 | 40 |
| NOTE: Plasma table and CNC control require separate 230V single phase / 20A supply REF: Hypertherm Operator Manual 808080 Revision 3 |
Hypertherm MAXPRO200
| MATERIAL THICKNESS | MAXIMUM CUTTING SPEED (MILD STEEL) |
| 10 GA MS | 240 IPM @ 130A |
| 1/4” MS | 235 IPM @ 200A |
| 3/8” MS | 150 IPM @ 200A |
| 1/2”MS | 130 IPM @ 200A |
| 3/4” MS | 80 IPM @ 200A |
| 1” MS | 55 IPM @ 200A |
| 1-1/4” MS | 32 IPM @ 200A |
| 1-1/2” MS | 22 IPM @ 200A Edge start only |
| 1-3/4” MS | 15 IPM @ 200A Edge start only |
| 2” MS | 10 IPM @ 200A Edge start only |
| GAS TYPE | AIR | NITROGEN | OXYGEN |
| Gas Quality | Clean, dry, oil-free per ISO 8573-1 Class 1.4.2 90 PSI, 400 scfh | 99.9% pure Clean, dry, oil free90 PSI, 400 scfh | 99.5% pure Clean, dry, oil free90 PSI, 120 scfh |
Note: MAXPRO200 is not a HyDefinition (HD) or HyPerformance (HPR) plasma system
Power Connections for the MAXPRO200 (CSA Models)
| INPUT VOLTAGE | INPUT CURRENT AT RATED OUTPUT (A) | FUSE/BREAKER SIZE (SLOW-BLOW) (A) |
| 220V THREE PHASE | 98 | |
| 240V THREE-PHASE | 90 | |
| 440V THREE PHASE | 49 | |
| 480V THREE PHASE | 45 | |
Hypertherm SmartSYNC Plasma Torches (STANDARD on 65, 85, and 105A systems)
SmartSYNC torches feature RFID capability that when coupled with a Hypertherm cartridge will communicate with a Powermax SYNC system to automatically set the amperage and process on the power supply.
The Hypertherm cartridge consumable platform is a revolutionary change to standard air plasma consumables. Each single-piece cartridge is optimized by process and amperage to ensure performance while dramatically simplifying the parts needed to cut or gouge with plasma.
Hypertherm cartridges for Powermax systems are manufactured to uphold our high standards for quality and reliability. As part of the manufacturing process, we test-fire each cartridge to ensure proper assembly and function. As a result, there may be burn marks on the tip of the cartridge. This is normal and not a sign of damage.
*Table displayed with additional options and accessories.
