In response to the Illinois State executive order #8, we are considered "Essential Business" and we will remain open at our 650 Race Street Location.

Combination Punch-Plasma Service and Support Documentation

We are committed to your success, and we are always happy to help you to get the most out of our products. We have compiled the information below to help you, and we always welcome you to contact us with your questions.

Message Us for Support

We're Right Here if You Need Us! If you do not see what you are looking for here, or if you would just like some help to answer your questions, please don't hesitate to send us a message or call us at 800-338-5471.

Plasma-Punch Combination Machines With Siemens Controls

Siemens Basic Operations

OP-101-3400All-840All-A Power Up Procedure (Base Machine)
OP-102-3400All-840All-A Power Down Procedure (Base Machine)
OP-105-3400XP-840DI-A Loading and Continuing Programs
OP-106-3400All-840DI-A Copying Data from Control to External Sources
OP-107-3400All-840DI-A Copying Data from External Sources to Control
OP-110-3400All-840All-A Torch Offset Procedure Inch Pre Apr-09
OP-111-3400All-840All-A Torch Offset Procedure MM Pre Apr-09

Siemens Advanced Operations

Adjusting Edge Detect
Reloading User Cycle Archive Procedure
Reloading NC Archive Procedure
Reloading PLC Archive Procedure
Reloading DP Archive Procedure
Reloading Part Program Archive Procedure
Creating User Cycle Archive Procedure
Creating NC Archive Procedure
Creating PLC Archive Procedure
Creating DP Archive Procedure
Creating Part Program Archive Procedure
Installing Piranha-Whitney Supplied Updated Archives
Operation & Maintenance Machine Side Reference

Programming – Siemens Basic Training

Siemens to Fanuc Code Comparisons
Siemens G Code Summary
Siemens M Code Summary
Siemens User Cycle Summary

NOTE: Manuals are shown for reference purposes only. Part numbers shown in these manuals may not be correct for all serial number ranges of machines. When ordering replacement parts, always reference the serial number of the machine in order to ensure the correct parts are ordered. Please contact Customer Service at 800-338-5471 for verification.

Plasma-Punch Combination Machines With Fanuc Controls

Fanuc Basic Operations

OP-002-All-1680I-A-Power Up Procedure
OP-003-3400RTC-16P-A Power Up Procedure with HT2000LHF
OP-004-3400RTC-16P-A Power Up Procedure with HT2000
OP-005-All-00P-A Power Up Procedure
OP-006-3600-00PB-A Loading Programs, Checking Diagnostics and MDI Tool Changes
OP-007-3700-00PC-A Loading Programs, Checking Diagnostics and MDI Tool Changes
OP-010-All-16Up-A Torch Offset Procedure Inch
OP-011-All-16Up-A Torch Offset Procedure MM
OP-012-All-00P-A Torch Offset Procedure Inch

Fanuc Advanced Operations

TR-200-All-16P-A Operation and Maintenance Machine Side Reference
TR-201-All-160I-A Operation and Maintenance Machine Side Reference

NOTE: Manuals are shown for reference purposes only. Part numbers shown in these manuals may not be correct for all serial number ranges of machines. When ordering replacement parts, always reference the serial number of the machine in order to ensure the correct parts are ordered. Please contact Customer Service at 800-338-5471 for verification.

© Copyright 2019 Mega Manufacturing, Creators of the Iconic Piranha Hydraulic Ironworker Machine - All Rights Reserved
Trademarks displayed on this page are the sole property of their respective owners.