Pipe Notching Striker Fig DH (4433640)

Pipe Notching Striker Fig DH (4433640)

FIG DH PIPE NOTCHER STRIKER
Part Number: 4433640

Get A Quote

Get A Quote

Learn More

About This Piranha Product

Fig. DH Pipe Notching Striker

The pipe notching attachments mount easily on the platen table in place of the punch die block. This is a single notch system. To notch both sides of the pipe you must rotate the pipe and realign with the notching die for the second notch. The pipe notching attachment is made up of three separate pieces, the pipe notching die holder, the pipe notching die and the pipe notching striker.

  • The pipe notching die holder is a universal die holder that bolts to the platen table and can accept 3/4” through 2” Schedule 40 Pipe Notching Dies
  • The pipe notching dies are spring return die sets that mount in the pipe notching die holder. Standard sizes of pipe notching dies are 3/4”, 1”, 1-1/4”, 1-1/2” and 2” Schedule 40. Other sizes of pipe and tube notching dies are available upon request but may require a different die holder.
  • The pipe notching striker is an extended flat bottom punch used in your standard stripper assembly to press down the pipe notching die.

Additional information

Weight 0.7 lbs
Dimensions 1.25 × 2.625 × 1.25 in