Piranha Ironworker Attachments

Piranha Hydraulic Ironworker Machine Attachments

to get the job done right.

Piranha offers a wide range of hydraulic ironworker machine attachments.

See the attachment list below or click here for attachments by machine model.

Ironworker Attachments

PIPE/TUBE NOTCHING ATTACHMENT

PIPE/TUBE NOTCHING ATTACHMENT

PIPE/TUBE NOTCHING ATTACHMENT

  • Mounts easily to platen
  • Spring-loaded return
  • Standard base die accommodates several die sizes
  • Allows single notch in Schedule 40 pipe 3/4″ through 2″ diameter*
  • Notching dies available for 3/4″, 1″, 1-1/4″,1-1/2″, 2″
  • Attaches to punch end of ironworker

*Contact Piranha for options for larger pipe or special notching applications.

Available for all Piranha ironworkers.

CHANNEL SHEAR

CHANNEL SHEAR

CHANNEL SHEAR

  • Attaches to punch end of ironworker in place of standard punch holder
  • Each cut removes 1/2″ slug from standard weight channel
  • Slug slides out the front of the shear after each cut
  • Pinned slide block adjusts to accommodate different widths of channel
  • Quick release locking handle secures material

CHANNEL DIE BLOCK

CHANNEL DIE BLOCK

CHANNEL DIE BLOCK

  • Punch channel legs and other structural shapes
  • Use standard punch holder and material stripper
  • Punch close to material web with offset dies
  • Mounts in place of standard die block
  • Die is flush with front of channel die block
  • Designed to punch a hole in the leg of a 3″ through 6″ standard weight channel
  • Designed to punch a hole in the web of a 4″ through 6″ standard weight channel
  • 50 ton punching capacity for all models
  • Uses urethane punch attachment (P2, P-40, P-50, P-65, P-70, P-90, P-110, P-120 and P-140)

Note: The machine stroke control must be used with this option.

BAR BENDER

BAR BENDER

BAR BENDER

  • Up to 2-1/2″ depending on available tonnage
  • Adjustable die for different radii

Available for all Piranha ironworkers.

BENDING BACKGAUGE

BENDING BACKGAUGE

BENDING BACKGAUGE

  • Produce repeatable parts with a backgauge specifically made for the bending attachment
  • Use the bending backgauge as a hard stop to increase productivity when making multiple parts
  • The backgauge eliminates the need for manually scribing bend lines

MECHANICAL BACKGAUGES

MECHANICAL BACKGAUGES

MECHANICAL BACKGAUGES

  • Allows quick set-up to repeat shearing length with a mechanical backstop
  • Positions in angle, plate and round bar sections
  • Lengths available—3′, 6′, 9′, 12′
  • Bolts on with no machine modifications
  • Easy access of sheared material
  • Backgauge allows for infinite adjustment
  • Compression sleeve for positive locking and no marring of the gauge bar

BENDING ATTACHMENTS

BENDING ATTACHMENTS

BENDING ATTACHMENTS

  • Optional sizes range from 6″ to 48″.

ELECTRICAL BACKGAUGE

ELECTRICAL BACKGAUGE

ELECTRICAL BACKGAUGE

  • Electronic version automatically cycles the ironworker when material contacts the backgauge
  • Incorporates all features of the mechanical backgauge
  • Available with new machines or as an option for existing machines*
  • Dedicated power switch and run light standard
  • Lengths available—3′, 6′, 9′, 12’—leg support included with 9′ and 12′ lengths

Note: Field installation requires minor modifications to electrical components.

28XX PUNCH ATTACHMENT

28XX PUNCH ATTACHMENT

28XX PUNCH ATTACHMENT

  • Accommodates all standard 28XX tooling
  • Expand punching capacity up to 5″
  • Mounts in place of standard punch holder and die block
  • Available with and without urethane stripper (shown)

Note: Standard 28XX tooling is for 50-ton and lighter applications. For applications greater than 50 tons, a heavy-duty punch is required.

Available for all Piranha ironworkers.

1-1/2″ OVERSIZE PUNCH ATTACHMENT

1-1/2″ OVERSIZE PUNCH ATTACHMENT

1-1/2″ OVERSIZE PUNCH ATTACHMENT

  • Punches up to 1-9/16″ hole within capacity limits of the machine
  • Mounts in place of standard punch holder and die block
  • Use same stripper action as standard punch attachment
  • Use No. EF punches and No. JF dies

PRESS BRAKE TOOLING HOLDERS

PRESS BRAKE TOOLING HOLDERS

PRESS BRAKE TOOLING HOLDERS

  • Allows use of press brake punches and dies for precision bending
  • Lengths up to 24″
  • Accepts a 1/2″ wide by 5/8″ tall tang (tooling sold separately)

ROLLER FEED TABLES

ROLLER FEED TABLES

ROLLER FEED TABLES

  • For fast, easy feeding of bar, plate and angle
  • Available in 5′ increments—bolt together for longer lengths
  • Adjust to accommodate floor height and machine type
  • Includes rollers for angle and flat bar sections
  • 20″ wide flat rollers; 6″ angle rollers

Available for all Piranha ironworkers.

QUICKSET GAUGING TABLES

QUICKSET GAUGING TABLES

QUICKSET GAUGING TABLES

  • Fast set-up for punching multiple holes
  • Includes plate and angle-gauging guide bars
  • Left and right hand extensions available in 5′ and 10′ lengths

Available for all Piranha ironworkers.

CHANNEL SHEAR IN ANGLE SECTION

CHANNEL SHEAR IN ANGLE SECTION

CHANNEL SHEAR IN ANGLE SECTION

  • No Slug Loss Cut
  • Simple Blade change for additional sizes
  • Can be used with Piranha Back Gauge
  • Upper Beam Modification Required
  • For use with Standard Weight C Channel only!

P-65 and PII-88 available sizes: 3″ and 4″

P-110, P-140, and PII-140 available sizes: 4″, 5″ and 6″