Piranha JF Style Die is a premium quality replacement Die for tooling manufacturers and tooling styles as follows:
85
F-62
419
319
P-4,P-70, P-90, P-110, P-120, P-140, PII-35, PII-65, PII-88, PII-110, PII-140, SEPP-35, SEPP-65, SEPP-88, SEPP-120, SEPP-140, PIANHA 1-1/2 OVERSIZED
500/3, 1120, 1154, 1154-30, 210/25, 225/25, 225B130, H1400, 200CNCBPL100/5
COMPACT 50, COMPACT 65, J14/A, J14/B, J18/GXA, J18/GXB, J21/GXA, J21/GXB, J25/GXA, J25/GXB, 60DP, 75DP, 95DP, 125DP, 60P625, 75P625, 95P625, 125P625, 175P625, 50XA, 65XA, 45XM, 60XS, 75XS, 95XS, 125XS, 175XS, SHARK, ULTIMA MODELS
DP50/110, GP70, GB7018, GB100, GB10018, GP135, GB13518, MM70A, MM70A18, MM100A, MM100A18, MM135A, MM135A18
OVERSIZED ATTACHMENT
OVERSIZED ATTACHMENT
OVERSIZED ATTACHMENT
OVERSIZED
OVERSIZED
OVERSIZED
SUPER 16 & 20, UIW-100
55-1/2
#7, #7A, #7 COMBINATION
#7, #7A, #7 COMBINATION
3514, 35017, 50-19, 50-20, 50-25, 50-31, 50DT-19, 50DT-20, 5007, 5010-25, 58-20, 5810-25, 5814-20, 7025, 70-31, 7010-25, 7014, 7810-25, 90-25, 90-31, 9010-25, 9014, 9510-25, 110-25, 110-31, 11014, 11810-25, 130-25, 130-31, 13014
120-150
16-70S, 20-95S
SINGLE CYL PRE 2000, DUAL CYLINDER MACHINES
The correct clearance between punch and die based on material thickness and strength is critical to punching accuracy and safety. Die clearance is sometimes misunderstood or miscalculated, and the result of getting this wrong is dangerous.
Example: You can’t punch a hole with a one inch punch and a one inch die. The proper and safe clearance between the punch and the die will be different based on the material thickness and hardness. The suggested die size for a one inch punch in 1/4 inch mild steel is 1.0329 or greater.
Use this tool to help determine the correct die size based on the suggested minimal die clearance.
Use this handy tool to find out.
About This Piranha Product
Piranha JF Style Die is a direct replacement Die for models as follows:
P-4,P-70, P-90, P-110, P-120, P-140, PII-35, PII-65, PII-88, PII-110, PII-140, SEPP-35, SEPP-65, SEPP-88, SEPP-120, SEPP-140, PIANHA 1-1/2 OVERSIZED
500/3, 1120, 1154, 1154-30, 210/25, 225/25, 225B130, H1400, 200CNCBPL100/5
COMPACT 50, COMPACT 65, J14/A, J14/B, J18/GXA, J18/GXB, J21/GXA, J21/GXB, J25/GXA, J25/GXB, 60DP, 75DP, 95DP, 125DP, 60P625, 75P625, 95P625, 125P625, 175P625, 50XA, 65XA, 45XM, 60XS, 75XS, 95XS, 125XS, 175XS, SHARK, ULTIMA MODELS
DP50/110, GP70, GB7018, GB100, GB10018, GP135, GB13518, MM70A, MM70A18, MM100A, MM100A18, MM135A, MM135A18
OVERSIZED ATTACHMENT
OVERSIZED ATTACHMENT
OVERSIZED ATTACHMENT
OVERSIZED
OVERSIZED
OVERSIZED
SUPER 16 & 20, UIW-100
55-1/2
#7, #7A, #7 COMBINATION
#7, #7A, #7 COMBINATION
3514, 35017, 50-19, 50-20, 50-25, 50-31, 50DT-19, 50DT-20, 5007, 5010-25, 58-20, 5810-25, 5814-20, 7025, 70-31, 7010-25, 7014, 7810-25, 90-25, 90-31, 9010-25, 9014, 9510-25, 110-25, 110-31, 11014, 11810-25, 130-25, 130-31, 13014
120-150
16-70S, 20-95S
SINGLE CYL PRE 2000, DUAL CYLINDER MACHINES