Combination Punch Plasma Machine Resources
Combination Punch Plasma
resources
Shops across North America rely on their Piranha combination punch plasma machines, and they know they can rely on us to provide the information they need to keep their punch plasma machines operating at peak efficiency.
Select a manual or video below for the information you need. Can’t find what you’re looking for? Contact us today, and we’ll be glad to provide the information you need.
Ask Us About Machine Upgrades and Retrofits
By upgrading your older machine with a new control and drive system, you can achieve the following benefits:
- Lower Your Maintenance Costs and extend the useful and profitable life of your well-maintained older machine.
- Maximize Uptime on Critical Machines.
- Reduce or eliminate downtime created from older technology.
- Increase the Productivity of Your Machine with the high speed and large hard disk capacity of the PC-based control.
- Take advantage of today’s networking technology for off-line program preparation, storage and fast downloading to seamlessly integrate your machine with your factory
- Contact us today!
Select a Link Below
Plasma-Punch Combination Machines With Siemens Controls
Siemens Basic Operations
OP-101-3400All-840All-A Power Up Procedure (Base Machine)
OP-102-3400All-840All-A Power Down Procedure (Base Machine)
OP-105-3400XP-840DI-A Loading and Continuing Programs
OP-106-3400All-840DI-A Copying Data from Control to External Sources
OP-107-3400All-840DI-A Copying Data from External Sources to Control
OP-110-3400All-840All-A Torch Offset Procedure Inch Pre Apr-09
OP-111-3400All-840All-A Torch Offset Procedure MM Pre Apr-09
Siemens Advanced Operations
Adjusting Edge Detect
Reloading User Cycle Archive Procedure
Reloading NC Archive Procedure
Reloading PLC Archive Procedure
Reloading DP Archive Procedure
Reloading Part Program Archive Procedure
Creating User Cycle Archive Procedure
Creating NC Archive Procedure
Creating PLC Archive Procedure
Creating DP Archive Procedure
Creating Part Program Archive Procedure
Installing Piranha-Whitney Supplied Updated Archives
Operation & Maintenance Machine Side Reference
Programming – Siemens Basic Training
Siemens to Fanuc Code Comparisons
Siemens G Code Summary
Siemens M Code Summary
Siemens User Cycle Summary
NOTE: Manuals are shown for reference purposes only. Part numbers shown in these manuals may not be correct for all serial number ranges of machines. When ordering replacement parts, always reference the serial number of the machine in order to ensure the correct parts are ordered. Please contact Customer Service at 800-338-5471 for verification.
Plasma-Punch Combination Machines With Fanuc Controls
Fanuc Basic Operations
OP-002-All-1680I-A-Power Up Procedure
OP-003-3400RTC-16P-A Power Up Procedure with HT2000LHF
OP-004-3400RTC-16P-A Power Up Procedure with HT2000
OP-005-All-00P-A Power Up Procedure
OP-006-3600-00PB-A Loading Programs, Checking Diagnostics and MDI Tool Changes
OP-007-3700-00PC-A Loading Programs, Checking Diagnostics and MDI Tool Changes
OP-010-All-16Up-A Torch Offset Procedure Inch
OP-011-All-16Up-A Torch Offset Procedure MM
OP-012-All-00P-A Torch Offset Procedure Inch
Fanuc Advanced Operations
TR-200-All-16P-A Operation and Maintenance Machine Side Reference
TR-201-All-160I-A Operation and Maintenance Machine Side Reference
NOTE: Manuals are shown for reference purposes only. Part numbers shown in these manuals may not be correct for all serial number ranges of machines. When ordering replacement parts, always reference the serial number of the machine in order to ensure the correct parts are ordered. Please contact Customer Service at 800-338-5471 for verification.
Fabrication Equipment
Thermal Cutting Machines
Contact Piranha
- 650 Race St.
Rockford IL 61105, USA - Toll Free: 800-338-5471
- Local: 815-964-6771
