Precision Tooling and Die Services

Equip your fabrication operation with precision-focused machinery, configurable solutions, and dependable support from Piranha. From high-throughput fiber laser cutting and versatile ironworking to safety-minded control retrofits, we help manufacturers improve repeatability, reduce downtime, and keep production moving. Our U.S.-based team brings practical fabrication knowledge to equipment selection, setup, training, parts, and long-term service.

Fabricator operating precision metalworking equipment

Our Precision Tooling and Die Services

Production-focused equipment, configuration resources, and support for accurate, efficient metal fabrication operations.

Fiber Laser Cutting

Piranha PlateLASER systems pair a thermally stable polymer-granite base with linear drives and up to 12 kilowatts of cutting power for fast, accurate sheet processing.

Ironworker Solutions

Versatile Piranha ironworkers perform punching, shearing, bending, and notching in one machine, helping shops complete common fabrication tasks with fewer equipment changeovers.

Control Retrofits

Tri-Speed Electrical Control Package Retrofits modernize older plate bending machines with reduced-voltage controls, a NEMA-12 enclosure, and two-hand operation designed to support current safety requirements.

Built For Throughput

Precision Equipment That Supports Production

Piranha helps fabrication teams build a more capable production line with equipment designed for repeatable results, durable performance, and scalable output. Configure solutions around the work you perform today while retaining room for automation as demand grows. From clean cut edges and accurate hole positioning to dependable parts access and expert guidance, Piranha supports a practical path toward less downtime and stronger return on investment.

Precision CNC laser cutting a steel sheet
Production Proven

Built for Results

See how fabrication-focused equipment supports demanding production work across industrial operations.

"Being able to have a brake that’s programmable … has cut down our setup time. You just pop in your program and you go. That’s fantastic. That’s what we’ve learned from our … operators using it. It’s turned out really well. I would recommend [a Piranha press brake]."

Chad Stetler

"Piranha gave us the easiest, quickest programming ability, with the most variable options [...] That is what really led me down the road to work with them full-time. Their price was good. The service that they offered for training I thought was outstanding compared to the other options."

Bill Johns

"It saves time and money, mostly from the elimination of processes [...] I can do stuff with my laser that a lot of people can’t do."

Mike Copeland

"I’m Michael Dodson with SleepSafe Beds and I’m the Fabrication Supervisor here. I started in welding fabrication when I was about 12 or 13 years old. My stepfather was a welding instructor for the United States Army and it just has progressed on from there. It’s something that I’ve done that I’ve just really enjoyed, and for the most part, it’s the only thing I’m good at. I’ve been here since 2008. Our product is a safety bed that is designed for special-needs people for in-home use. Our customers know that they’re getting a top-quality product. Our customer service is probably the best in the industry. Whereas, now when we’re starting to introduce new products, we do everything here. So it’s a matter of minutes or hours as opposed to days and weeks. Our main use of the [Piranha] press brake is [making] a structural corner out of 14 gauge steel. The quality of the product has to be as close to perfect as possible because it is a visible part. When someone walks into their room, they will see the part exposed. When we were looking at press brakes, I had explained to the owner of that company that the Delem controller was so easy that even he could use it, and he has absolutely no metal fabrication background. Setting up the machine was extremely easy with the touch screen controller. When the factory rep came, he stayed here for two days [and] went over everything very explicitly. [He] made sure I understood everything and when he left, [it was] like [I had] been running it for several years. The customer service has been more than you could ask for. If I have to get ahold of my contact it’s usually within a few minutes when he gets back to me. I wouldn’t buy anything else, quite honestly."

Michael Dodson

"My name is Jano Tuchnya. I’m the director of Sonnex. We are involved in manufacturing. I love mechanical engineering and manufacturing and installations. I managed to surround myself with people like myself who were willing to work day and night to pull off the project. We are little bit different in terms of really having heart for customers. I used to be consumer of parts and I realized that there is a need for somebody to supply parts on demand but keep their word. The pressure is huge, but we have a reputation in the marketplace that we deliver. It is very important to be able to deliver reliably in whatever we do. We are the only people in Australia that can manufacture some of these parts. We have a contract cutting for one big company here in Adelaide which exports the part. They came to us for this single capability that we can do intricate parts in 20 millimeters on that Whitney laser. There were about ten laser cutting companies in Adelaide but nobody has the size, so we are the only people that can cut longer than three meters. The reason we started to explore the possibility of getting the combination machine is because Whitney was promoting that machine is the cheapest way to produce structural steel parts which are not high precision like microns. When I went on a visit to America, I saw some of these machines in operation and then eventually purchased it. Sure enough there is no better or cheaper way to produce them or more efficiently. I actually initially ordered a different machine which was fit for 1.5 x 3 meters long. The person who was selling this machine mentioned to me that there is Whitney machine which is big and powerful. When I realized that this machine that is bigger and more powerful than the ones that other people in Adelaide have, I was thinking that maybe I should bring a gun to a knife fight and that’s what we did and it paid off very well. This is one of those really major advantages. We had two beds of 3 by 6 meters so we could load four plates on each bed and switch them so we were straight away doing lots of night cutting or lights out cutting with our people and we just come in the morning and collect the part that I give us a huge manufacturing ability to the extent where we started to take work away from other people simply because we could deliver in two or three days what other people could not. These lasers actually have a huge impact on my business because we had the first one in the country to be able to cut 32 stainless steel. Another thing was, when it comes to the efficiency, when you have a part with lots of holes and the piercing of a 20 gauge plate is only 2 or 3 seconds, that brings the prices down, and very soon we had more customers than we could handle. Just recently, we had one job to cut 6,200 parts and we were doing it in quite a short time. I still did not know how we going to do it and then we find the way to shear cut and punch plasma for the whole row. We realized that we actually have bigger margins than we would have if we were doing it any other way. But the biggest impression on the customer was that we told him after about five days that the job is finished so we have promised for this job to come back February next year simply because of the packability. Something we didn’t know before, the customer actually didn’t give us the whole order he cut up the job to smaller pieces and gave it to a few people because he had no idea that somebody can enter the whole job in that period of time. He gave us this part [of the order] for six weeks and we delivered all parts in one week. I can see Whitney is a company that is looking for something new, something that is better. Not everybody else does. They’re always pushing boundaries. I would definitely recommend Whitney. The machines are unique in what they do. The machine is suitable for their part and there is no other machine that would do it so efficiently. And I’m just grateful that they keep going and trying to provide equipment for people like me who always trying to improve their operation."

Jano Tuchnya

"When I realized that this machine is bigger and more powerful […] I was thinking, maybe I should bring a gun to a knife fight. And that’s what we did and it paid off really well."

Jano Tuchnya

"Being able to have a brake that’s programmable … has cut down our setup time. You just pop in your program and you go. That’s fantastic. That’s what we’ve learned from our … operators using it. It’s turned out really well. I would recommend [a Piranha press brake]."

Chad Stetler

"Piranha gave us the easiest, quickest programming ability, with the most variable options [...] That is what really led me down the road to work with them full-time. Their price was good. The service that they offered for training I thought was outstanding compared to the other options."

Bill Johns

"It saves time and money, mostly from the elimination of processes [...] I can do stuff with my laser that a lot of people can’t do."

Mike Copeland

"I’m Michael Dodson with SleepSafe Beds and I’m the Fabrication Supervisor here. I started in welding fabrication when I was about 12 or 13 years old. My stepfather was a welding instructor for the United States Army and it just has progressed on from there. It’s something that I’ve done that I’ve just really enjoyed, and for the most part, it’s the only thing I’m good at. I’ve been here since 2008. Our product is a safety bed that is designed for special-needs people for in-home use. Our customers know that they’re getting a top-quality product. Our customer service is probably the best in the industry. Whereas, now when we’re starting to introduce new products, we do everything here. So it’s a matter of minutes or hours as opposed to days and weeks. Our main use of the [Piranha] press brake is [making] a structural corner out of 14 gauge steel. The quality of the product has to be as close to perfect as possible because it is a visible part. When someone walks into their room, they will see the part exposed. When we were looking at press brakes, I had explained to the owner of that company that the Delem controller was so easy that even he could use it, and he has absolutely no metal fabrication background. Setting up the machine was extremely easy with the touch screen controller. When the factory rep came, he stayed here for two days [and] went over everything very explicitly. [He] made sure I understood everything and when he left, [it was] like [I had] been running it for several years. The customer service has been more than you could ask for. If I have to get ahold of my contact it’s usually within a few minutes when he gets back to me. I wouldn’t buy anything else, quite honestly."

Michael Dodson

"My name is Jano Tuchnya. I’m the director of Sonnex. We are involved in manufacturing. I love mechanical engineering and manufacturing and installations. I managed to surround myself with people like myself who were willing to work day and night to pull off the project. We are little bit different in terms of really having heart for customers. I used to be consumer of parts and I realized that there is a need for somebody to supply parts on demand but keep their word. The pressure is huge, but we have a reputation in the marketplace that we deliver. It is very important to be able to deliver reliably in whatever we do. We are the only people in Australia that can manufacture some of these parts. We have a contract cutting for one big company here in Adelaide which exports the part. They came to us for this single capability that we can do intricate parts in 20 millimeters on that Whitney laser. There were about ten laser cutting companies in Adelaide but nobody has the size, so we are the only people that can cut longer than three meters. The reason we started to explore the possibility of getting the combination machine is because Whitney was promoting that machine is the cheapest way to produce structural steel parts which are not high precision like microns. When I went on a visit to America, I saw some of these machines in operation and then eventually purchased it. Sure enough there is no better or cheaper way to produce them or more efficiently. I actually initially ordered a different machine which was fit for 1.5 x 3 meters long. The person who was selling this machine mentioned to me that there is Whitney machine which is big and powerful. When I realized that this machine that is bigger and more powerful than the ones that other people in Adelaide have, I was thinking that maybe I should bring a gun to a knife fight and that’s what we did and it paid off very well. This is one of those really major advantages. We had two beds of 3 by 6 meters so we could load four plates on each bed and switch them so we were straight away doing lots of night cutting or lights out cutting with our people and we just come in the morning and collect the part that I give us a huge manufacturing ability to the extent where we started to take work away from other people simply because we could deliver in two or three days what other people could not. These lasers actually have a huge impact on my business because we had the first one in the country to be able to cut 32 stainless steel. Another thing was, when it comes to the efficiency, when you have a part with lots of holes and the piercing of a 20 gauge plate is only 2 or 3 seconds, that brings the prices down, and very soon we had more customers than we could handle. Just recently, we had one job to cut 6,200 parts and we were doing it in quite a short time. I still did not know how we going to do it and then we find the way to shear cut and punch plasma for the whole row. We realized that we actually have bigger margins than we would have if we were doing it any other way. But the biggest impression on the customer was that we told him after about five days that the job is finished so we have promised for this job to come back February next year simply because of the packability. Something we didn’t know before, the customer actually didn’t give us the whole order he cut up the job to smaller pieces and gave it to a few people because he had no idea that somebody can enter the whole job in that period of time. He gave us this part [of the order] for six weeks and we delivered all parts in one week. I can see Whitney is a company that is looking for something new, something that is better. Not everybody else does. They’re always pushing boundaries. I would definitely recommend Whitney. The machines are unique in what they do. The machine is suitable for their part and there is no other machine that would do it so efficiently. And I’m just grateful that they keep going and trying to provide equipment for people like me who always trying to improve their operation."

Jano Tuchnya

"When I realized that this machine is bigger and more powerful […] I was thinking, maybe I should bring a gun to a knife fight. And that’s what we did and it paid off really well."

Jano Tuchnya

"Being able to have a brake that’s programmable … has cut down our setup time. You just pop in your program and you go. That’s fantastic. That’s what we’ve learned from our … operators using it. It’s turned out really well. I would recommend [a Piranha press brake]."

Chad Stetler

"Piranha gave us the easiest, quickest programming ability, with the most variable options [...] That is what really led me down the road to work with them full-time. Their price was good. The service that they offered for training I thought was outstanding compared to the other options."

Bill Johns

"It saves time and money, mostly from the elimination of processes [...] I can do stuff with my laser that a lot of people can’t do."

Mike Copeland

"I’m Michael Dodson with SleepSafe Beds and I’m the Fabrication Supervisor here. I started in welding fabrication when I was about 12 or 13 years old. My stepfather was a welding instructor for the United States Army and it just has progressed on from there. It’s something that I’ve done that I’ve just really enjoyed, and for the most part, it’s the only thing I’m good at. I’ve been here since 2008. Our product is a safety bed that is designed for special-needs people for in-home use. Our customers know that they’re getting a top-quality product. Our customer service is probably the best in the industry. Whereas, now when we’re starting to introduce new products, we do everything here. So it’s a matter of minutes or hours as opposed to days and weeks. Our main use of the [Piranha] press brake is [making] a structural corner out of 14 gauge steel. The quality of the product has to be as close to perfect as possible because it is a visible part. When someone walks into their room, they will see the part exposed. When we were looking at press brakes, I had explained to the owner of that company that the Delem controller was so easy that even he could use it, and he has absolutely no metal fabrication background. Setting up the machine was extremely easy with the touch screen controller. When the factory rep came, he stayed here for two days [and] went over everything very explicitly. [He] made sure I understood everything and when he left, [it was] like [I had] been running it for several years. The customer service has been more than you could ask for. If I have to get ahold of my contact it’s usually within a few minutes when he gets back to me. I wouldn’t buy anything else, quite honestly."

Michael Dodson

"My name is Jano Tuchnya. I’m the director of Sonnex. We are involved in manufacturing. I love mechanical engineering and manufacturing and installations. I managed to surround myself with people like myself who were willing to work day and night to pull off the project. We are little bit different in terms of really having heart for customers. I used to be consumer of parts and I realized that there is a need for somebody to supply parts on demand but keep their word. The pressure is huge, but we have a reputation in the marketplace that we deliver. It is very important to be able to deliver reliably in whatever we do. We are the only people in Australia that can manufacture some of these parts. We have a contract cutting for one big company here in Adelaide which exports the part. They came to us for this single capability that we can do intricate parts in 20 millimeters on that Whitney laser. There were about ten laser cutting companies in Adelaide but nobody has the size, so we are the only people that can cut longer than three meters. The reason we started to explore the possibility of getting the combination machine is because Whitney was promoting that machine is the cheapest way to produce structural steel parts which are not high precision like microns. When I went on a visit to America, I saw some of these machines in operation and then eventually purchased it. Sure enough there is no better or cheaper way to produce them or more efficiently. I actually initially ordered a different machine which was fit for 1.5 x 3 meters long. The person who was selling this machine mentioned to me that there is Whitney machine which is big and powerful. When I realized that this machine that is bigger and more powerful than the ones that other people in Adelaide have, I was thinking that maybe I should bring a gun to a knife fight and that’s what we did and it paid off very well. This is one of those really major advantages. We had two beds of 3 by 6 meters so we could load four plates on each bed and switch them so we were straight away doing lots of night cutting or lights out cutting with our people and we just come in the morning and collect the part that I give us a huge manufacturing ability to the extent where we started to take work away from other people simply because we could deliver in two or three days what other people could not. These lasers actually have a huge impact on my business because we had the first one in the country to be able to cut 32 stainless steel. Another thing was, when it comes to the efficiency, when you have a part with lots of holes and the piercing of a 20 gauge plate is only 2 or 3 seconds, that brings the prices down, and very soon we had more customers than we could handle. Just recently, we had one job to cut 6,200 parts and we were doing it in quite a short time. I still did not know how we going to do it and then we find the way to shear cut and punch plasma for the whole row. We realized that we actually have bigger margins than we would have if we were doing it any other way. But the biggest impression on the customer was that we told him after about five days that the job is finished so we have promised for this job to come back February next year simply because of the packability. Something we didn’t know before, the customer actually didn’t give us the whole order he cut up the job to smaller pieces and gave it to a few people because he had no idea that somebody can enter the whole job in that period of time. He gave us this part [of the order] for six weeks and we delivered all parts in one week. I can see Whitney is a company that is looking for something new, something that is better. Not everybody else does. They’re always pushing boundaries. I would definitely recommend Whitney. The machines are unique in what they do. The machine is suitable for their part and there is no other machine that would do it so efficiently. And I’m just grateful that they keep going and trying to provide equipment for people like me who always trying to improve their operation."

Jano Tuchnya

"When I realized that this machine is bigger and more powerful […] I was thinking, maybe I should bring a gun to a knife fight. And that’s what we did and it paid off really well."

Jano Tuchnya
The Piranha Difference

Why Choose Piranha?

Piranha combines equipment breadth, proven heritage, and practical support for fabrication operations.

Deep Heritage

More than 145 years of combined brand heritage informs durable, production-minded equipment design.

Complete Line

Source lasers, ironworkers, bending equipment, and tooling from one experienced manufacturing partner.

U.S. Support

U.S.-based phone assistance, remote diagnostics, training, and same-day in-stock parts shipping support uptime.

Scalable Output

Automation-ready equipment helps growing shops add capacity without replacing their core machine.

Meet the Piranha Team

Fabrication expertise focused on your production goals.

Piranha began in 1974 when Harry Oswald and Bob Brown developed an ironworker to streamline production at the foundry where they worked. They recognized that other fabricators faced the same challenge and brought that practical solution to market. Today, Piranha builds on more than 145 years of combined heritage through the W.A. Whitney and Bertsch brands, offering a broad range of metal fabrication and thermal cutting equipment. From its Belvidere headquarters and Rockford manufacturing and assembly facility, the team supports manufacturers with equipment knowledge across the shop workflow. Piranha’s vision remains grounded in real production needs: help customers reduce downtime, gain efficiency, and make confident investments in equipment that can grow with their operation.

FoundedBuilding fabrication solutions since 1974
Heritage145+ years of combined experience
CoverageServing all 50 U.S. states

Frequently Asked Questions

What types of precision fabrication equipment does Piranha offer?

Piranha offers a broad range of metal fabrication and cutting equipment, including CNC fiber lasers, plasma systems, combination punch/plasma machines, ironworkers, press brakes, plate rolls, shears, structural punching equipment, and punch tooling. For the solutions highlighted here, Piranha provides high-throughput laser cutting, multi-function ironworking, and electrical control retrofits for older plate bending machinery.

How does a CNC fiber laser improve precision and throughput?

What operations can a Piranha ironworker perform?

Can older plate bending machines be updated for safer controls?

How can I configure equipment and request pricing?

What support is available after purchasing a Piranha fiber laser?

How quickly can replacement parts be shipped?

What should buyers plan for when shipping fabrication equipment?

Still Have Equipment Questions?

Speak with fabrication specialists about your production requirements and options.

Proven Industry Heritage

Awards and Recognition

145+ years heritage badge

145+ Years Heritage

Combined legacy across trusted fabrication equipment brands.

U.S.-based support badge

U.S. Based Support

Domestic technical assistance and in-stock parts resources.

Original ironworker innovation badge

Original Ironworker Innovation

Production problem-solving heritage since Piranha’s founding.

Build a More Capable Production Line

Tell us about your materials, part requirements, and production goals. A Piranha specialist can help identify suitable equipment, configuration options, support resources, and next steps.

Contact Us Today

For immediate assistance, feel free to give us a direct call at 800-338-5471.